Daily Archives: June 17, 2011

Nendoroid Kaname Madoka: School Uniform version

Wonderful Hobby Life for You 14 will soon coming with summer wonder festival 2011,

and now GSC revealed The first WonFes-exclusive Nendoroid :

Nendoroid Kaname Madoka : Schol Uniform version

Series: Puella Magi Madoka Magica

Specifications: Painted ABS&PVC non-scale posable figure
Height: Approximately 100mm
Price: ¥3,500
Sculpting: Takano Akihito
Sculpting Assistance: Nendoron
Number Available:
– 3000 will be available at the event.
– Online orders will be made to order and delivered in late October.
Maximum Per Person:
– Max 2 per person at the event.
– Max 3 per person online.

they are 2 way for you to get this nendoroid,first at the event and second is web sales :

Event Sales

Wonder Festival 2011 (Summer)
This product will be sold at the WONDERFUL HOBBY LIFE FOR YOU!! 14 booth that the Wonder Festival 2011 (Summer) taking place on 2011/07/24 (Sunday). Please use the order sheet at the event to place your order on the day.

  • A maximum of two figures per person will be available.
  • Stock is limited.

Web Sales

From 2011/07/24 (Sunday) from 17:00 until 2011/08/01 (Monday) at 21:00 this figure will be available for order on the GOODSMILE ONLINE SHOP. (Japanese Only)

  • A maximum of three figures per person will be available.
  • Products will be made-to-order.
  • Products will be sent out in late October 2011.

what is the meaning of PVC, Resin, cold cast, ABS, etc

well in figure we often hear about PVC,resin,Abs etc, like this figure made from PVC material or This is Resin figure,figma made from soft PVC etc,here the explanation about that I found on Google  😛

Basically, no heat is applied when the material is set in the mould. By mixing two types of liquids, a tough plastic compound is formed. It is the most expensive type of material for figure. Nicer and more live color compare to PVC.

Polystone is the common name for Polyethylene, just another plastic. But there are two main types, High and Low Density. High density is used for the figurines. Polystone offers good resistance to moisture, impact, heat, sunlight, cold and has good rigidity. I mean good compared to PVC. Everything here is compared to PVC.

Polystone distorts of about 80 degrees Celsius. It is not that ductile, lighter than water, and can be moulded, machined, and joined together using welding (difficult to glue). It’s a thermoplastic as well, meaning it can be heated and reshaped and cooled. This is easy to mould and rather durable. The higher heat resistance and rigidity also means figurines do not lean or distort, or worse, start degrading in sunlight. But for this added quality, polystone figurines are more expensive than PVC ones and the selection is a lot less.

Unlike PVC which is more ductile, Polystone does BREAK because of the higher rigidity. So shipping overseas is a bit more of a risk for these. Use EMS at all costs.

And yes, it’s also known as polyethene, the plastic bag. So people who have been fooled by the fancy name, please hang your head in shame.

Poly Vinyl Chloride (PVC)
PVC is one of the most common plastics used in the world. It’s quite similar to rubber and the toughness/malleability of PVC is dependant on the plastisers added. More plastisers = more softness, since they straighten out neatly the long macromolecular polymer chains into neat rows. Some figure collectors complain of an oily film after a while and I would think this is due to the plasticisers migrating to the surface of the plastic. Small plasticiser molecules are pretty mobile and after a period of time, they accumulate on the surface to produce a oily crud.

This is also why PVC tends to get a bit crappy and brittle after a long time. Oh yeah these plasticisers are quite toxic too. And if you have a fire at home, dump your figurines at them to extinguish it, since the chlorine produced retards the flame. Btw, some plasticisers are thought to reduce the quality of MAN SPERM.

A very large percentage of the figures sold are made of PVC. From gashapon, trading figures to 1/6s, these are mainly PVCs. Cheap material cost, easy of moulding, ductility (it won’t break much, just bend) are the reasons why it is used.

Never leave them in the sun. Ultraviolet rays produce free radicals on PVC, chlorine free radicals, that combine to form chlorine gas and the material is decomposed. The sun also heats them up and PVC distorts at a temperature of 60 degrees Celsius. Being a thermoplastic, you can actually heat it up and bend it, then cool for it to maintain that shape.

PVC, due to the addition of chlorine atoms which have a pretty high molecular mass compared to C and H, is heavy for a plastic.

ABS (Acrylonitrile Butadiene Styrene)
ABS is commonly used for the bases of figurines. It’s pretty recognisable, just think of LEGO blocks. That’s what they are made of. ABS has good impact strength and is not really flexible but rather stiff. These properties plus the glossy surface make it a suitable material for figurine bases. Interestingly, unlike all the above, ABS is not a compound but just a blend of 3 types of plastic.

“ABS is an amorphous thermoplastic blend. The recipe is 15-35% acrylnitrile, 5-30% butadiene and 40-60% styrene. Depending on the blend different properties can be achieved.

Acrylnitrile contributes with thermal and chemical resistence, and the rubberlike butadiene gives ductility and impact strength. Styrene gives the glossy surface and makes the material easily machinable and less expensive.” -Designinsite

ABS is more expensive than PVC and is slightly lighter too. Its price is commonly used as the dividing line between common plastics like PVC and more expensive industrial plastics. ABS has a higher distortion temperature at 75 degrees. Its properties are also easily modified by varying the proportions of its components. Its natural colour is an opaque ivory but dyes can be applied.